R&S FPC Series - CalculateN:Marker:function:ddemod:merror[:Result]; CalculateN:Marker:function:ddemod:mindex[:Result]; CalculateN:Marker:function:ddemod:moerror[:Result]

Remote Control
R&S
®
FPC
316User Manual 1178.4130.02 ─ 07
Example: //Query frequency deviation
CALC:MARK:FUNC:DDEM:MDEV?
Usage: Query only
CALCulate<n>:MARKer:FUNCtion:DDEMod:MERRor[:RESult]?
This command queries the magnitude error of the measured signal.
Prerequisites for this command
●
Select FSK demodulation ([SENSe:]DDEMod).
Suffix:
<n>
.
irrelevant
Return values:
<MagnitudeError> <numeric value>
Default unit: PCT
Example: //Query magnitude error
CALC:MARK:FUNC:DDEM:MERR?
Usage: Query only
CALCulate<n>:MARKer:FUNCtion:DDEMod:MINDex[:RESult]?
This command queries the modulation index of the measured signal.
Prerequisites for this command
●
Select ASK demodulation ([SENSe:]DDEMod).
Suffix:
<n>
.
irrelevant
Return values:
<ModIndex> <numeric value>
Default unit: PCT
Example: //Query modulation index
CALC:MARK:FUNC:DDEM:MIND?
Usage: Query only
CALCulate<n>:MARKer:FUNCtion:DDEMod:MOERror[:RESult]?
This command queries the modulation error.
Suffix:
<n>
.
irrelevant
Return values:
<ModError> <numeric value>
Default unit: PCT
Remote Commands of the Digital Demodulation