R&S FPC Series - Audio Settings; Display Settings

Remote Control
R&S
®
FPC
215User Manual 1178.4130.02 ─ 07
Parameters:
<Unit> FEET
Length units in feet.
METers
Length units in meter.
*RST: METers
Example: //Select length unit
UNIT:LENG MET
19.6
Display Settings
DISPlay:BRIGhtness...................................................................................................... 215
SYSTem:DISPlay:UPDate[:STATe]...................................................................................215
DISPlay:BRIGhtness <Brightness>
This command defines the brightness of the display backlight.
Parameters:
<Brightness> <numeric value>
Range: 0 to 1
*RST: 1 (100 %)
Example: //Define display brightness
DISP:BRIG 0.80
Manual operation: See "Display" on page 356
SYSTem:DISPlay:UPDate[:STATe] <State>
This command turns the display during remote operation of the R&S FPC on and off.
Parameters:
<State> ON | OFF | 1 | 0
*RST: ON
Example: //Turn off display during remote operation
SYST:DISP:UPD OFF
19.7 Audio Settings
SYSTem:BEEPer:KEY:VOLume...................................................................................... 216
SYSTem:BEEPer:POVerload[:STATe]...............................................................................216
SYSTem:BEEPer:VOLume..............................................................................................216
Audio Settings