R&S FPC Series - Network Connection

Remote Control
R&S
®
FPC
207User Manual 1178.4130.02 ─ 07
SYSTem:PRESet:USER <Preset>
This command selects a dataset whose configuration serves as a user-defined preset
state.
Prerequisites for this command
●
Select user-defined preset mode (SYSTem:PRESet:MODE).
Parameters:
<Preset> String containing the path and name of the file, including the file-
name extension (.set).
The path and file name comply with Windows conventions. Note
that the folder references in the string are case-sensitive.
Example: //Select user-defined preset state
SYST:PRES:MODE USER
SYST:PRES:USER '\Public\funny\result.set'
Manual operation: See "Preset Key" on page 357
19.4 Network Connection
SYSTem:COMMunicate:LAN:ETHernet?.......................................................................... 207
SYSTem:COMMunicate:LAN:GATeway............................................................................ 207
SYSTem:COMMunicate:LAN:SUBMask............................................................................208
SYSTem:COMMunicate:SOCKet:ADDRess...................................................................... 208
SYSTem:COMMunicate:SOCKet:DHCP[:STATe]............................................................... 208
SYSTem:COMMunicate:LAN:ETHernet?
This command queries the MAC address of the R&S FPC.
Return values:
<MacAddress> String containing the MAX address.
Example: //Query the MAC address
SYST:COMM:LAN:ETH?
Usage: Query only
Manual operation: See "LAN" on page 356
SYSTem:COMMunicate:LAN:GATeway <Gateway>
This command selects the gateway in a LAN.
Prerequisites for this command
●
Turn off DHCP (SYSTem:COMMunicate:SOCKet:DHCP[:STATe]).
Parameters:
<Gateway> String containing the identifier of the gateway.
Network Connection