EasyManua.ls Logo

R&S FPC Series - Remote Commands of the Analog Demodulation

R&S FPC Series
419 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Remote Control
R&S
®
FPC
303User Manual 1178.4130.02 ─ 07
●
CALCulate<n>:DELTamarker<m>:Y?
●
Delta marker position: set to peak:
CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK]
●
Delta marker position: set to next peak:
CALCulate<n>:DELTamarker<m>:MAXimum:NEXT
●
Delta marker position: set to minimum:
CALCulate<n>:DELTamarker<m>:MINimum[:PEAK]
Commands to configure marker demodulation described elsewhere.
●
Demodulation state:
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation[:STATe]
●
Demodulation domain:
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:SELect
●
Demodulation time:
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:HOLD
CALCulate<n>:MARKer<m>:FUNCtion:FIXed...................................................................303
CALCulate<n>:MARKer<m>:FUNCtion:FIXed
This command synchronizes the bargraph frequency to one of the marker frequencies
in the frequency scan.
At the same, the command switches to the fixed frequency measurement.
Suffix:
<n>, <m>
.
irrelevant
Usage: Event
Manual operation: See "Marker To Fixed Freq" on page 385
19.14 Remote Commands of the Analog Demodulation
● Measurements and Result Displays......................................................................303
● Frequency............................................................................................................. 308
● Amplitude.............................................................................................................. 309
● Bandwidth............................................................................................................. 309
● Sweep Control.......................................................................................................311
● Limits.....................................................................................................................312
19.14.1 Measurements and Result Displays
CALCulate<n>:FEED..................................................................................................... 304
CALCulate<n>:MARKer:FUNCtion:ADEMod:AFRequency[:RESult]?...................................304
CALCulate<n>:MARKer:FUNCtion:ADEMod:AM[:RESult]?.................................................305
CALCulate<n>:MARKer:FUNCtion:ADEMod:CARRier[:RESult]?.........................................305
Remote Commands of the Analog Demodulation

Table of Contents