R&S FPC Series - Page 388

Function Reference
R&S
®
FPC
385User Manual 1178.4130.02 ─ 07
Remote command:
Marker state: CALCulate<n>:MARKer<m>[:STATe] on page 278
Marker position (x-axis): CALCulate<n>:MARKer<m>:X on page 279
Marker position (y-axis):CALCulate<n>:MARKer<m>:Y? on page 281
Delta marker state: CALCulate<n>:DELTamarker<m>[:STATe] on page 273
Delta marker position (x-axis): CALCulate<n>:DELTamarker<m>:X on page 273
Delta marker position (relative): CALCulate<n>:DELTamarker<m>:X:RELative
on page 274
Delta marker position (y-axis): CALCulate<n>:DELTamarker<m>:Y? on page 275
Marker Type
See "Selecting the marker type" on page 122.
(Only for frequency scan.)
Remote command:
With corresponding syntax MARKer or DELTamarker
Marker To Fixed Freq
See "Synchronizing the bargraph frequency and marker position" on page 146.
(Only for frequency scan.)
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:FIXed on page 303
Marker Demodulation
See Chapter 14.10.4, "Marker Demodulation", on page 128.
Remote command:
State: CALCulate<n>:MARKer<m>:FUNCtion:DEModulation[:STATe]
on page 284
Modulation: CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:SELect
on page 283
Demodulation time: CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:HOLD
on page 283
Volume: SYSTem:AUDio:VOLume on page 287
Marker Display
See "Selecting the marker display type" on page 122.
Remote command:
CALCulate<n>:MARKer<m>:FREQuency:MODE on page 276
All Markers Off
See "Removing markers or delta markers" on page 122.
Remote command:
Markers: CALCulate<n>:MARKer<m>:AOFF on page 275
Delta markers: CALCulate<n>:DELTamarker<m>:AOFF on page 271
Function Reference: Receiver Application