R&S FPC Series - Page 389

Function Reference
R&S
®
FPC
386User Manual 1178.4130.02 ─ 07
20.5.9 Marker To Menu
Access: [Mkr →]
Set To Peak.................................................................................................................386
Set To Next Peak........................................................................................................ 386
Set To Minimum.......................................................................................................... 386
All Markers To Peak.................................................................................................... 386
Center = Marker / Level = Marker............................................................................... 386
Marker Tracking.......................................................................................................... 386
Select Marker..............................................................................................................387
Search Range............................................................................................................. 387
Set To Peak
See "Positioning markers automatically" on page 123.
Remote command:
Marker: CALCulate<n>:MARKer<m>:MAXimum[:PEAK] on page 277
Delta marker: CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK] on page 272
Set To Next Peak
See "Positioning markers automatically" on page 123.
Remote command:
Marker: CALCulate<n>:MARKer<m>:MAXimum:NEXT on page 277
Delta marker: CALCulate<n>:DELTamarker<m>:MAXimum:NEXT on page 272
Set To Minimum
See "Positioning markers automatically" on page 123.
Remote command:
Marker: CALCulate<n>:MARKer<m>:MINimum[:PEAK] on page 278
Delta marker: CALCulate<n>:DELTamarker<m>:MINimum[:PEAK] on page 273
All Markers To Peak
See "Positioning markers automatically" on page 123.
Remote command:
not supported
Center = Marker / Level = Marker
See "Positioning markers automatically" on page 123.
Remote command:
Center = marker frequency: CALCulate<n>:MARKer<m>:FUNCtion:CENTer
on page 276
Ref level = marker level: CALCulate<n>:MARKer<m>:FUNCtion:REFerence
on page 276
Marker Tracking
See "Keeping the marker on the peak" on page 124.
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:STRack[:STATe] on page 277
Function Reference: Receiver Application