R&S FPC Series - CalculateN:Marker:function:ddemod:cferror[:Result]; CalculateN:Marker:function:ddemod:mdepth[:Result]; CalculateN:Marker:function:ddemod:mdeviation[:Result]

Remote Control
R&S
®
FPC
315User Manual 1178.4130.02 ─ 07
Example: //Query carrier frequency drift
CALC:MARK:FUNC:DDEM:CFDR?
Usage: Query only
CALCulate<n>:MARKer:FUNCtion:DDEMod:CFERror[:RESult]?
This command queries the carrier frequency error of the measured signal.
Suffix:
<n>
.
irrelevant
Return values:
<Frequency> <numeric value>
Default unit: Hz
Example: //Query carrier frequency error
CALC:MARK:FUNC:DDEM:CFER?
Usage: Query only
CALCulate<n>:MARKer:FUNCtion:DDEMod:MDEPth[:RESult]?
This command queries the modulation depth of the measured signal.
Prerequisites for this command
●
Select ASK demodulation ([SENSe:]DDEMod).
Suffix:
<n>
.
irrelevant
Return values:
<ModIndex> <numeric value>
Default unit: PCT
Example: //Query modulation depth
CALC:MARK:FUNC:DDEM:MDEP?
Usage: Query only
CALCulate<n>:MARKer:FUNCtion:DDEMod:MDEViation[:RESult]?
This command queries the frequency deviation of the measured signal.
Prerequisites for this command
●
Select FSK demodulation ([SENSe:]DDEMod).
Suffix:
<n>
.
irrelevant
Return values:
<Frequency> <numeric value>
Default unit: Hz
Remote Commands of the Digital Demodulation