R&S FPC Series - Applications

Remote Control
R&S
®
FPC
231User Manual 1178.4130.02 ─ 07
CALibration<n>:STATus?
This command queries calibration status for the current measurement.
Suffix:
<n>
.
irrelevant
Return values:
<Status> String containing the calibration status.
NORMalized
Default calibration or user calibration is active.
APPRoximated
Approximate calibration. Measurement uncertainty must be
anticipated.
Example: //Query calibration status
CAL:STAT?
Usage: Query only
Manual operation: See "Calibrate" on page 397
SYSTem:PRESet:CALibration:DISCard <State>
This command turns the mechanism that discards or keeps user calibration after a pre-
set on and off.
Parameters:
<State> ON | OFF | 1 | 0
*RST: ON
Example: //Discard correction values after preset
SYST:PRES:CAL:DISC ON
Manual operation: See "Preset Key" on page 357
19.11 Applications
INSTrument[:SELect]......................................................................................................231
INSTrument[:SELect] <Application>
This command selects the measurement application.
Applications