R&S FPC Series - CalculateN:Marker:function:ddemod:mpower[:Result]; [Sense:]Ddemod; [Sense:]Ddemod:fsk:offset

Remote Control
R&S
®
FPC
317User Manual 1178.4130.02 ─ 07
Example: //Query modulation error
CALC:MARK:FUNC:DDEM:MOER?
Usage: Query only
CALCulate<n>:MARKer:FUNCtion:DDEMod:MPOWer[:RESult]?
This command queries the power of the carrier signal.
Suffix:
<n>
.
irrelevant
Return values:
<Power> <numeric value>
Default unit: dBm
Example: //Query carrier power
CALC:MARK:FUNC:DDEM:MPOW?
Usage: Query only
[SENSe:]DDEMod <Measurement>
This command selects the demodulation scheme of the signal you are measuring.
Parameters:
<Measurement> ASK
Selects ASK modulation.
FSK
Selects FSK modulation.
*RST: FSK
Example: //Select measurement
DDEM ASK
Manual operation: See "ASK" on page 391
See "FSK" on page 391
[SENSe:]DDEMod:FSK:OFFSet?
This command queries the measured frequency deviation of an FSK signal.
Prerequisites for this command
●
Select FSK demodulation ([SENSe:]DDEMod).
Return values:
<Frequency> <numeric value>
Default unit: Hz
Example: //Query frequency deviation
DDEM:FSK:OFFS?
Usage: Query only
Remote Commands of the Digital Demodulation