R&S FPC Series - Page 387

Function Reference
R&S
®
FPC
384User Manual 1178.4130.02 ─ 07
Remote command:
not supported
Upper Limit
See "Selecting a limit line" on page 131, "Using a threshold line" on page 131 and
"Removing limit lines" on page 132.
Remote command:
Threshold line: CALCulate<n>:LIMit<k>:UPPer:THReshold on page 295
Custom line: CALCulate<n>:LIMit<k>:UPPer:SELect on page 294
Removal: CALCulate<n>:LIMit<k>:DELete on page 291
Limit check: CALCulate<n>:LIMit<k>:FAIL? on page 291
Lower Limit
See "Selecting a limit line" on page 131, "Using a threshold line" on page 131 and
"Removing limit lines" on page 132.
Remote command:
Threshold line: CALCulate<n>:LIMit<k>:LOWer:THReshold on page 292
Custom line: CALCulate<n>:LIMit<k>:LOWer:SELect on page 292
Removal: CALCulate<n>:LIMit<k>:DELete on page 291
Limit check: CALCulate<n>:LIMit<k>:FAIL? on page 291
Select Trace <x>
"Selecting a trace for the limit check" on page 145
Remote command:
not supported
Audio Beep
See "Performing limit checks" on page 132.
Remote command:
CALCulate<n>:LIMit<k>:BEEP[:STATe] on page 289
20.5.8 Marker Menu
Access: [Mkr]
Marker <x>..................................................................................................................384
Marker Type................................................................................................................ 385
Marker To Fixed Freq..................................................................................................385
Marker Demodulation..................................................................................................385
Marker Display............................................................................................................ 385
All Markers Off.............................................................................................................385
Marker <x>
See "Positioning a marker" on page 121 and "Adding additional markers" on page 121.
(Only for frequency scan.)
Function Reference: Receiver Application