R&S FPC Series User Manual

Function Reference
R&S
®
FPC
356User Manual 1178.4130.02 ─ 07
Hardware
See "Selecting the BNC connector usage" on page 39.
Remote command:
BNC connector: SYSTem:BNC:MODE on page 210
LAN
See "Connecting the R&S FPC to a LAN" on page 40.
Remote command:
MAC address: SYSTem:COMMunicate:LAN:ETHernet? on page 207
Gateway: SYSTem:COMMunicate:LAN:GATeway on page 207
Subnet mask: SYSTem:COMMunicate:LAN:SUBMask on page 208
IP address: SYSTem:COMMunicate:SOCKet:ADDRess on page 208
DHCP: SYSTem:COMMunicate:SOCKet:DHCP[:STATe] on page 208
WiFi
See "Connecting the R&S FPC to a WLAN" on page 41.
Remote command:
not supported
Date and Time
See Chapter 9.3, "Date and Time", on page 41.
Remote command:
Date: SYSTem:DATE on page 210
Time: SYSTem:TIME on page 214
Time zone: SYSTem:TZONee on page 214
Regional
See Chapter 9.4, "Regional Settings", on page 42.
Remote command:
Language: SYSTem:LANGuage on page 213
Language list: SYSTem:LANGuage:CATalog? on page 213
Date format: DISPlay:DATE:FORMat on page 210
Display
See Chapter 9.5, "Display Settings", on page 43.
Remote command:
DISPlay:BRIGhtness on page 215
Audio
See Chapter 9.6, "Audio Settings", on page 43.
Remote command:
Key click: SYSTem:BEEPer:KEY:VOLume on page 216
System beeper: SYSTem:BEEPer:VOLume on page 216
Beep on power overload: SYSTem:BEEPer:POVerload[:STATe] on page 216
Power
See Chapter 9.7, "Power Settings", on page 44.
Function Reference: Setup

R&S FPC Series Specifications

General

Brand	R&S
Model	FPC Series
Category	Measuring Instruments
Language	English