R&S FPC Series User Manual

Remote Control
R&S
®
FPC
203User Manual 1178.4130.02 ─ 07
*OPC............................................................................................................................204
*OPT?...........................................................................................................................204
*RST.............................................................................................................................204
*SRE............................................................................................................................ 204
*STB?...........................................................................................................................205
*TRG............................................................................................................................ 205
*TST?...........................................................................................................................205
*WAI.............................................................................................................................205
*CLS
Clear status
Sets the status byte (STB), the standard event register (ESR) and the EVENt part of
the QUEStionable and the OPERation registers to zero. The command does not
alter the mask and transition parts of the registers. It clears the output buffer.
Usage:
Setting only
*ESE <Value>
Event status enable
Sets the event status enable register to the specified value. The query returns the con-
tents of the event status enable register in decimal form.
Parameters:
<Value> Range: 0 to 255
*ESR?
Event status read
Returns the contents of the event status register in decimal form and then sets the reg-
ister to zero.
Return values:
<Contents> Range: 0 to 255
Usage: Query only
*IDN?
Identification
Returns the instrument identification.
Return values:
<ID> "Rohde&Schwarz,<device type>,<part number>/<serial num-
ber>,<firmware version>"
Example:
Rohde&Schwarz,FPC1000,1328.6660K02/xxxxxx,1.00
Usage: Query only
Common Commands

R&S FPC Series Specifications

General

Brand	R&S
Model	FPC Series
Category	Measuring Instruments
Language	English