To Next Page

To Previous Page

Page

10 of 89

D-64367 Mühltal-Waschenbach

+49 (0) 6154-638 0  www.rea-verifier.de

REA

Elektronik

GmbH

Streamlining

•

Development

•

Automation

Electronic Devices and Systems

Options / Alternatives (only present if ordered, see delivery note)

Hardware:

• Extension plate made of Plexiglas with 82.5 mm cut-out

• Extension plate made of Plexiglas with 175 mm cut-out

• 20 mil adapter for using the 20 mil aperture function

• Portable protocol printer, type TD-GPT-U with 2 rolls of thermal paper

• Connection cable for protocol printer

• Power supply for protocol printer

• Unit case in place of cardboard packaging, black, plastic

Software:

• REA TransWin32 PC program with operating manual for capturing, evaluation and saving

measurement protocols on a PC with MS-WINDOWS operating system;

this program is most often used as an alternative to the protocol printer (internal software option

usable via activation code)

• Article database software with operating manual (internal software option usable via activation

code)

• Code comparator function (internal software option usable via activation code)

• Optional code types (internal software option usable via activation code)

All software options can be freely activated and operated exclusively with the serial number of a REA

ScanCheck 3n. A REA ScanCheck 3n will not work with TransWin32 software or another software

option without the corresponding activation code if the activation key is not correct.

The license key is inseparably linked to the respective REA ScanCheck 3n.

Software options that are provided with a new unit are made available before delivery and require no

additional license key for activation.

REA ScanCheck 3n Operating Manual

Other manuals for REA ScanCheck 3n