REA ScanCheck 3n - Determination of Serial Numbers on the REA Product

© REA Elektronik GmbH REA ScanCheck 3 - August 2010 Page 8 of 89
D-64367 Mühltal-Waschenbach
+49 (0) 6154-638 0  www.rea-verifier.de
REA
Elektronik
GmbH
Streamlining
•
Development
•
Automation
Electronic Devices and Systems
1.3 Determination of Serial Numbers on the REA Product
For contact with the manufacturer or a system partner, it is important to
indicate the precise type and the serial number of the affected REA
product. This information can be found on the company label on the
hardware together with the article number.
Please notate this information on your delivery documents and always
use it when corresponding with REA Elektronik or an authorized system
or service partner.
If the unit is already in operation, the system information can be called
up from the Setup menu via the menu item "5 System Info."
Button sequence: <Setup> <5 Systeminfo>
Version of operating program (GUI software)
Version of core operating software
Version of verifier evaluation software
Serial number of the unit. 0030.207.106-0XXXX-X
This should be identical to the serial number on the ID plate.
The unit name: Standard: SC3_Master
User name: Standard: SC3 User