RFL Electronics RFL 9660 - Page 175

RFL 9660 RFL Electronics Inc.
April 24, 2007 13-22 (973) 334-3100
Command: +PMHT=n Modem on Hold Timer
Values:
n = 0–13
Default:
0
Description:
Determines if the modem will accept a V.92 Modem on Hold (MOH) request
and will set the MoH timeout.
+PMHT=0 Deny MOH request
+PMHT=1 Grant MOH request with 10 second timeout
+PMHT=2 Grant MOH request with 20 second timeout
+PMHT=3 Grant MOH request with 30 second timeout
+PMHT=4 Grant MOH request with 40 second timeout
+PMHT=5 Grant MOH request with 1 minute timeout
+PMHT=6 Grant MOH request with 2 minute timeout
+PMHT=7 Grant MOH request with 3 minute timeout
+PMHT=8 Grant MOH request with 4 minute timeout
+PMHT=9 Grant MOH request with 6 minute timeout
+PMHT=10 Grant MOH request with 8 minute timeout
+PMHT=11 Grant MOH request with 12 minute timeout
+PMHT=12 Grant MOH request with 16 minute timeout
+PMHT=13 Grant MOH request with indefinite timeout
+PMHT=? Displays the allowed values
+PMHT? Displays the current value
Command: +PQC=n Quick Connect Control
Values:
n = 0, 1, 2, or 3
Default:
3
Description:
Controls V.92 shortened Phase 1 and Phase 2 startup procedures (Quick
Connect). When line conditions are stable, quick connect results in shortened
connect times; however, significant fluctuation in line conditions from call to
call can cause longer connect times; thus, it may be advisable to disable
quick connect.
+PQC=0 Enables Short Phase 1 and Short Phase 2 (Quick Connect)
+PQC=1 Enables Short Phase 1
+PQC=2 Enables Short Phase 2
+PQC=3 Disables Short Phase 1 and Short Phase 2
+PQC=? Displays the allowed values
+PQC? Displays the current value