Ricoh A-C2 - ID Sensor

26 January, 2001 PHOTOCONDUCTOR UNIT (PCU)
3-31
Replacement
Adjustment
3.11.6 ID SENSOR
1. PCU (☛ 3.11.1)
2. Fusing unit (☛ 3.15.1)
3. Development unit (☛ 3.12.1)
4. Remove the PCU rail [A] (! x2, " x1)
5. Remove the ID sensor bracket [B] (! x1, " x1)
6. Remove the ID sensor [C] (! x1)
7. Perform the ID sensor initial setting with SP3-001-2 (☛ Chapter 5, “Service
Tables”)
B004R931.WMF
[B]
[C]
[A]