TRAY HEATER (OPTIONAL PAPER TRAY UNIT) 26 January, 2001
1-56
1.16 TRAY HEATER (OPTIONAL PAPER TRAY UNIT)
!
CAUTION
Unplug the machine power cord before starting the following procedure.
1. Attach the optional tray heater [A] to the heater bracket [B].
2. Install the harness holder [C].
3. Remove the rear lower cover of the machine and the rear cover of the optional
paper tray unit.
4. Remove the upper and lower paper trays of the optional paper tray unit.
5. Install the heater assembly [D] (! x1).
6. Install four harness clamps [E].
7. Route the harness [F] and connect it to the harness [G] and heater harness [H].
A284I601.WMF
B004I201.WMF
B004I531.WMF
[G]
[H]
[E]
[F]
[D]
[A]
[B]
[C]
To Next Page
Loading...
