26 January, 2001 AUTO REVERSE DOCUMENT FEEDER INSTALLATION
1-45
Installation
1.10.2 INSTALLATION PROCEDURE
!
CAUTION
Unplug the main machine power cord before starting the following
procedure.
1. Unpack the ARDF and remove all tapes and shipping retainers.
2. Attach and tighten [A] (! x2 stud).
3. Mount the ARDF by aligning the screw keyholes [B] of the ARDF support plate
over the stud screws, and slide the ARDF toward the front of the machine.
NOTE: To avoid damaging the ARDF, hold it as shown in the illustration.
4. Secure the ARDF [C] (! x2).
B351I122.WMF
B351I123.WMF
[A]
[B]
[C]
To Next Page
Loading...
