26 January, 2001 TWO-TRAY FINISHER INSTALLATION
1-37
Installation
1.8.2 INSTALLATION PROCEDURE
!
CAUTION
Switch off the main machine and unplug its power cord before starting the
following procedure.
NOTE: The Paper Tray Unit (A682) and Bridge Unit (B397) must be installed
before installing this finisher. (☛ 1.4, 1.6)
1. Unpack the finisher and remove all tapes and shipping retainers from outside
the unit.
2. Open the front door [A] and remove all tapes and shipping materials from inside
the finisher unit.
B352I101.WMF
B352I102.WMF
[A]
To Next Page
Loading...
