Ricoh A-C2 - Installation Procedure

26 January, 2001 1-BIN TRAY UNIT INSTALLATION
1-23
Installation
1.5.2 INSTALLATION PROCEDURE
!
CAUTION
Switch off the main machine and unplug its power cord before starting the
following procedure.
1. Remove the scanner unit
NOTE: If the ARDF is installed, remove the ARDF before removing the
scanner unit.
1) Remove the connector cover [A].
2) Disconnect the scanner cable [B].
3) Remove the scanner unit [C] (! x 3).
B376I113.WMF
B376I114.WMF
[A]
[B]
[C]