Ricoh A-C2 - By-Pass Tray

19 January, 2001 BY-PASS TRAY UNIT
3-5
Replacement
Adjustment
3.6 BY-PASS TRAY UNIT
Use this procedure to remove the complete by-pass tray unit from the machine. If
you wish to remove only the table, or some of the components of this unit, ☛ 3.16.
1. Duplex unit (☛ 3.4)
2. Left cover [A] (! x1)
3. Right cover [B] (! x1)
4. Connectors [C] (" x2)
5. By-pass unit [D] (! x4)
NOTE: After removing the screws, lift to unhook the by-pass tray unit from the
frame of the machine.
B004R952.WMF
[A]
[B]
[C]
[D]