Ricoh A-C2 - Drum Charge Roller Cleaning; ID Sensor Pattern Production Timing

DRUM CHARGE 26 January, 2001
6-46
6.8.3 ID SENSOR PATTERN PRODUCTION TIMING
An ID sensor pattern is created after the main machine is powered on, and after
finishing a job of 10 or more sheets.
The ID sensor pattern production interval can be adjusted with SP2-210 (ID Sensor
Pattern Interval).
6.8.4 DRUM CHARGE ROLLER CLEANING
The drum charge roller [A], always in contact with the drum, gets dirty easily, so the
cleaning pad [B] also remains in contact with the charge roller to clean it. The pin
[C] in contact with the cam gear [D] enables the gear to move the cleaning pad
from side to side and improve cleaning.
New Vref Decision
........
1109832
Vref Decision
132
........
12 151413
Series of copies
ID sensor pattern
Vsp/Vsg
ID sensor pattern
Vsp/Vsg
New Vref Decision
B004D535.WMF
B004D303.WMF
[A]
[B]
[C]
[D]