Ricoh A-C2 User Manual

26 January, 2001 INSTALLATION REQUIREMENTS
1-1
Installation
1. INSTALLATION PROCEDURE
!
CAUTION
Never turn off the main power switch when the power LED is lit or flashing.
To avoid damaging the hard disk or memory, press the operation power
switch to switch the power off, wait for the power LED to go off, and then
switch the main power switch off.
NOTE: The main power LED ( ) lights or flashes while the platen cover or
ARDF is open, while the main machine is communicating with a facsimile
or the network server, or while the machine is accessing the hard disk or
memory for reading or writing data.
1.1 INSTALLATION REQUIREMENTS
!
CAUTION
B004I016.WMF
“Rating Voltage of Output
C
onnector
,
Max. D
C
24 V”
LCT
“Rating Voltage of Output
Connector
,
Max. DC24 V”
Finisher
“Rating Voltage of Output
C
onnector
,
Max. D
C
24 V”
Scanner Unit
“Rating Voltage of Output
C
onnector
,
Max. D
C
24 V”
ARDF

Ricoh A-C2 Specifications

General

Brand	Ricoh
Model	A-C2
Category	All in One Printer
Language	English