SERVICE PROGRAM MODE 19 January, 2001
5-4
5.1.2 SERVICE PROGRAM MODE TABLES
Service Table Key
Notation What it means
[range / default / step] Example: [-9 ~ +9 / +3.0 / 0.1 mm step]. The setting can be adjusted in
the range ±9, value reset to +3.0 after an NVRAM reset, and the value
can be changed in 0.1 mm steps with each key press.
italics Comments added for reference.
*
Value stored in NVRAM. After a RAM reset, this default value (factory
setting) is restored.
1111 An SP number set in bold-italic denotes a “Special Service Program”
mode setting that appears only after entering the SP mode by pressing
! and Copy SP together. (☛ 5-1)
B003/B006 Denotes the 35 cpm model.
B004/B007 Denotes the 45 cpm model.
DFU
Denotes “Design or Factory Use”. Do not change this value.
Japan only
The feature or item is for Japan only. Do not change this value.
(S) Sideways feed direction
(L) Lengthwise feed direction
SP1-xxx: Feed
SP1 Mode Number Function and [Setting]
1001* Leading Edge Registration Adjusts the printing leading edge registration using
the trimming area pattern (SP2-902-3, No.11).
[+9 ~ –9 / 3.0 / 0.1 mm]
Use ! to toggle between ± before entering the
value.
Specification: 3 ±2 mm
1002* Side-to-Side Registration
Adjusts the printing side-to-side registration from
the 3rd paper feed station using the trimming area
pattern (SP2-902-3, No.11).
Use the ! key to toggle between + and – before
entering the value.
Specification: 2 ±1.5 mm
1Tray1
2Tray2
[–9~ +9/ +3.0 mm / 0.1 mm step]
3Tray3
4Tray4
[–9~ +9/ +2.0 mm / 0.1 mm/step]
Tray3, Tray4 for Paper Feed Unit.
5 Duplex Tray
[–9~ +9/ +0.0 mm / 0.1 mm/step]
6 By-pass Tray
[–9~ +9/ +3.0 mm / 0.1 mm/step]
7 LCT (if present)
[–9~ +9/ +1.5 mm / 0.1 mm/step]
1003* Registration Buckle Adjustment
1 Paper Feed Trays/LCT
2 Duplex Tray
3 By-pass Tray
4Tray1 Feed
Adjusts the relay clutch timing at registration. Relay
clutch timing determines the amount of paper
buckle at registration. (A “+” setting causes more
buckling.)
[–9~+9/+0.0 mm (1 mm for 1st Tray Feed)/0.1 mm
step]
1007
By-pass Feed Paper Size
Display
Displays the paper width sensor data for the by-
pass feed table.
To Next Page
Loading...
