Ricoh A-C2 - By-Pass Table Removal

BY-PASS TRAY 19 January, 2001
3-62
3.16.6 BY-PASS TABLE REMOVAL
Note: To remove the entire by-pass tray unit, and not just the table, ☛ 3.6
1. Hinge cover (☛ 3.16.1)
2. Harness [A] (! x1).
3. Screws [B] (" x2)
4. By-pass table [C].
CAUTION: To relieve pressure on the spring during removal, depress it as
shown in the illustration.
B004R505.WMF
[A]
[C]
[B]