19 January, 2001 SERVICE PROGRAM MODE
5-9
Service
Tables
SP2 Mode Number Function and [Setting]
2109* 7 Beam Pitch Change
Counter
Displays how many times the LD unit position has
been changed (how many times the resolution has
changed.)
When the laser beam pitch adjustment is done, this
counter is reset to zero.
8 Beam Pitch Data Reset Resets the values of SP2-109-6 and SP2-109-7.
After replacing the LD unit, this SP mode must be
performed. See the LD Unit Removal Procedure.
2110 Test Mode dpi
Sets the scanning resolution (dpi). DFU
[See below / 8 / 0~18]
Range 0 400 x 400 dpi
1 391 x 406 dpi
2 406 x 391 dpi
4 300 x 300 dpi
8 600 x 600 dpi
15 439 x 430 dpi
16 476 x 476 dpi
17 483 x 465 dpi
18 465 x 483 dpi
2112 Polygon Motor Off Timer
Input the time that the polygon motor is to switch off
after the printer has remained idle for the specified
time and entered the standby mode.
If set to zero, the polygon motor never switches off
in standby mode. However, if the machine enters
the energy saver mode, the polygon motor will
ignore the zero setting and switch itself off.
[0~60 s / 10 s / 5 s step]
2201* Development Bias Adjustment
1* Development Bias Adjusts the development bias for copying.
Use as a temporary measure to correct faint copies
from an aging drum.
[200~700 / 600V / 10V step]
2* ID Sensor Pattern
Adjusts the development bias for the ID sensor
pattern for V
SP
[200~700 / 380V / 10V step]
2207 Forced Toner Supply
Forces the toner bottle to supply toner at 1-second
intervals for up to 30 seconds. To start, press !.
2208* 1* Toner Supply Mode Selects the toner mode.
0: Sensor control
1: Image pixel count.
If you select 1, SP2-209-002 should be set to its
default value. Use image pixel count modes only as
a temporary measure if the ID or TD sensor is
defective.
2209* Toner Supply Rate Adjusts the toner supply rate.
1* Toner Rate Sets the amount of toner supplied every second by
the toner supply motor.
Increasing this value reduces the toner supply
clutch on time. Use a lower value if the user tends
to make lots of copies that have a high proportion of
black.
[10~800 mg/s / 60 mg/s / 5 mg/s step]
To Next Page
Loading...
