26 January, 2001 SERVICE PROGRAM MODE
5-17
Service
Tables
SP4 Mode Number Function and [Setting]
4305* 8K/16K Detection
Selects whether or not the copier determines
that the original is 8K/16K size when the APS
sensor does not detect the original size.
This SP is intended for use with 8K/16K Chinese
paper sizes only.
For Chaina/Taiwan area:
[0,1 /0/1]
0: 8k/16k not detected – Non-standard size
1: 8K, 16K paper size detect enabled
Other areas:
[0,1 /0/1]
0: 8k/16k not detected - Non-standard size
1: 8k/16k not detected - Non-standard size
4307* APS Sensor Output Display Determines whether or not the original size is
detected while the exposure lamp lights during
initialization.
0 ~ 1 /1 / 1 step
0: Original size detection at power on disabled.
1: Original size detection at power on enabled.
4428 1 Flag Display
DFU
2 Start
DFU
3 Flag Reset
DFU
4901* 1 Image Data Path Setting
DFU
2 Read ASIC ID
DFU
3 BK Adjustment
DFU
4 EO Adjustment
DFU
5 Dummy Range Adjustment
DFU
6 Range Adjustment
DFU
7 Gain Adjustment – Ech
DFU
8 Gain Adjustment – Och
DFU
9 Dummy Range Adjustment
DFU
10 Range Adjustment
DFU
11 Scan-Apli. Gain Adjustment
– Ech
DFU
12 Scan-Apli. Adjustment –
Och
DFU
13 Standard White Level
Adjustment
DFU
14 Overflow Flag
DFU
15 Time-Out Flag
DFU
16 Error Flag
DFU
17 SBU Reset Error Flag
DFU
18* Range Adjustment
DFU
19* Gain Adjustment – Ech at
Factory
DFU
20* Gain Adjustment – Och at
Factory
DFU
21*
Standard White Level
Adjustment at Factory
DFU
To Next Page
Loading...
