26 January, 2001 SERVICE PROGRAM MODE
5-37
Service
Tables
SP6 Mode Number Function and [Setting]
6105* Staple Position Adjustment Adjusts the staple position in the main scan
direction when using the two-tray finisher.
[–3.5~+3.5 / 0.0 / 0.5 mm step]
Press
!
to toggle
±
. A larger value shifts the
staple toward the edge of the paper.
6113* Punch Hole Adjustment Adjusts the punch hole position.
[–7~+7 / 0 / 0.5 mm steps]
Press
!
to toggle
±
. A larger value shifts the
holes toward the edge of the paper.
1* 2-Holes
2-hole punches for Japan, North America,
Europe, and 4-hole punches for Northern Europe.
2* 3-Holes
3-hole punches for North America, and 4-hole
punches for Europe.
6902* Fold Position Adjustment
Japan Only
To Next Page
Loading...
