26 January, 2001 PAPER TRAY UNIT INSTALLATION
1-21
Installation
14. Position the side fence [A] and bottom fence [B] of the paper trays, load the
paper, and then lock them in position by tightening the hex nuts with the green
wrench [C] provided in the 1st paper tray.
15. Attach the appropriate tray decals [D] provided in the accessory box for the
main machine.
16. Turn on the machine main power switch.
17. Enter the paper size for each paper tray using the UP mode.
18. Check the machine’s operation and copy quality.
A682I120.WMF
A682I500.WMF
[D]
[A]
[B]
[C]
[D]
To Next Page
Loading...
