1-BIN TRAY UNIT INSTALLATION 26 January, 2001
1-26
15. Attach the copy tray.
Bridge Unit (B397) not installed:
1) Attach the decal [A].
2) Secure [B] (! x2: Stepped screw) into the side of the 1-bin tray housing.
3) Attach the copy tray [C] to the stepped screws.
Bridge Unit (B397) installed:
1) Open the cover of the bridge unit [D].
2) Install the copy tray bracket [E] (! x1: tapping screw).
3) Install the copy tray [F] (" x 1).
A684I493.WMF
B376I501.WMF
[A]
[B]
[C]
[D]
[E]
[F]
To Next Page
Loading...
