26 January, 2001 TWO-TRAY FINISHER INSTALLATION
1-39
Installation
8. Install two trays [A] (! x1 each).
9. Connect the finisher cable [B] to the main machine below the right rear handle.
10. Turn on the main switch and check the finisher operation.
NOTE: When moving the finisher to a new location, if you wish to put the finisher
back in the original carton, change the DIP switch settings. See DIP
Switches in the finisher service manual.
B352I103.WMF
B352I106.WMF
[A]
[B]
To Next Page
Loading...
