System Service Mode
SM Appendix 3-21 D115/D116
Appendix:
SP Mode
Tables
4935*
Color Image Adjust
001
Main Scan MTF Level
[0 to 3 / 0 / 1/step]
Adjust the MTF level for the main scan. This setting is only activated for the
specified mode with SP4-921-004.
0: None, 1: Weak, 2: Middle, 3: Strong
002
Main Scan MTF Strength
[0 to 5 / 0 / 1/step]
Adjust the MTF strength for the main scan. This setting is only activated for
the specified mode with SP4-921-004.
0: 1, 1: 1/32, 2: 1/16, 3: 1/8, 4: 1/4, 5: 1/2
003
Sub Scan MTF Level
[0 or 1 / 0 / 1/step]
Turns on or off the MTF for the sub scan. This setting is only activated for the
specified mode with SP4-921-004.
0: No, 1: Yes
004
Sub Scan MTF Strength
[0 to 5 / 0 / 1/step]
Adjust the MTF strength for the sub scan. This setting is only activated for the
specified mode with SP4-921-004.
0: 1, 1: 1/32, 2: 1/16, 3: 1/8, 4: 1/4, 5: 1/2
005
Smooth Level
[0 to 2 / 0 / 1/step]
Adjust the smooth level. This setting is only activated for the specified mode
with SP4-921-004.
0: None, 1: Weak, 2: Strong
006
Brightness
[0 to 255 / 128 / 1/step]
Adjust the brightness level. This setting is only activated for the specified
mode with SP4-921-004.
007
Contrast
[0 to 255 / 128 / 1/step]
Adjust the contrast level. This setting is only activated for the specified mode
with SP4-921-004.
To Next Page
Loading...
