System Service Mode
D115/D116 3-36 SM Appendix
5481
Authentication Error Code
These SP codes determine how the authentication failures are displayed.
001
System Log Disp
Determines whether an error code appears in the system log after a user
authentication failure occurs.
[0 to 1/0/1]
0: Off
1: On
002
Panel Disp
Determines whether an error code appears on the operation panel after a user
authentication failure occurs.
[0 to 1/1/1]
1: On
0: Off
5490
MF Keycard Japan Only
Job Permit Setting
Sets up operation of the machine with a keycard.
[0 to 1/0/1]
0: Disabled. Cancels operation if no code is input.
1: Enabled. Allows operation if another code is input and decrements the
counter once for use of the entered code.
To Next Page
Loading...
