System Service Mode
SM Appendix 3-45 D115/D116
Appendix:
SP Mode
Tables
062
HTTP Proxy Use
This SP setting determines if the proxy server is used when the machine
communicates with the service center.
063
HTTP Proxy Host
This SP sets the address of the proxy server used for communication
between embedded RCG-N and the gateway. Use this SP to set up or display
the customer proxy server address. The address is necessary to set up
embedded RCG-N.
The address display is limited to 127 characters. Characters beyond
the 127th character are ignored.
This address is customer information and is not printed in the SMC
report.
064
HTTP Proxy Port
This SP sets the port number of the proxy server used for communication
between embedded RCG N and the gateway. This setting is necessary to set
up embedded RCG-N.
This port number is customer information and is not printed in the
SMC report.
065
HTTP Proxy Aut Usr
This SP sets the HTTP proxy authentication user name.
The length of the name is limited to 31 characters. Any character
beyond the 31st character is ignored.
This name is customer information and is not printed in the SMC
report.
To Next Page
Loading...
