System Service Mode
D115/D116 3-48 SM Appendix
085
Firm Up Usr Conf
This SP setting determines if the operator can confirm the previous version of
the firmware before the firmware update execution. If the option to confirm the
previous version is selected, a notification is sent to the system manager and
the firmware update is done with the firmware files from the URL.
086
Firmware Size
Allows the service technician to confirm the size of the firmware data files
during the firmware update execution.
087
CERT: Macro Vsn
Displays the macro version of the @Remote certification.
088
CERT: PAC Vsn
Displays the PAC version of the @Remote certification.
089
CERT: ID2 Code
Displays ID2 for the @Remote certification. Spaces are displayed as
underscores (_). Asterisks (*) indicate that no @Remote certification exists.
090
CERT: Subject
Displays the common name of the @Remote certification subject. CN = the
following 17 bytes. Spaces are displayed as underscores (_). Asterisks (*)
indicate that no DESS exists.
091
CERT: Seri Num
Displays serial number for the @Remote certification. Asterisks (*) indicate
that no DESS exists.
092
CERT: Issuer
Displays the common name of the issuer of the @Remote certification. CN =
the following 30 bytes. Asterisks (*) indicate that no DESS exists.
To Next Page
Loading...
