System Service Mode
SM Appendix 3-123 D115/D116
Appendix:
SP Mode
Tables
1001 Bit Switch
003 Bit Switch 3 0 1
bit 0 DFU - -
bit 1 DFU - -
bit 2
[PCL5e/c]: Legacy HP compatibility
0: Disable 1: Enable
Enabled: Uses the same left margin as older HP models such as
HP4000/HP8000.
In other words, the left margin defined in the job (usually "<ESC>*r0A")
will be changed to "<ESC>*r1A"
bit 3 DFU - -
bit 4 DFU - -
bit 5 DFU - -
bit 6 DFU - -
bit 7 DFU - -
1001 Bit Switch
004
Bit Switch 4 DFU
- -
1001 Bit Switch
005 Bit Switch 5 0 1
bit 0 DFU - -
bit 1 Multiple copies if a paper size or type
mismatch occurs
Disabled
(single
copy)
Enabled
(multiple)
If a paper size or type mismatch occurs during the printing of multiple
copies, only a single copy is output by default. Using this BitSw, the device
can be configured to print all copies even if a paper mismatch occurs.
To Next Page
Loading...
