System Service Mode
D115/D116 3-124 SM Appendix
bit 2 DFU - -
bit 3
[PS] PS Criteria
Pattern3 Pattern1
Change the number of PS criterion used by the PS interpreter to
determine whether a job is PS data or not.
Pattern3: includes most PS commands.
Pattern1: A small number of PS tags and headers
bit 4
Increase max number of the stored jobs
to 1000 jobs.
Disable
(100)
Enable
(1000)
Enabled: Changes the maximum number of jobs that can be stored on the
HDD via Job Type settings to 1000. The default is 100.
bit 5 DFU - -
bit 6
Method for determining the image
rotation for the edge to bring on
Disable Enable
Enabled: The image rotation will be performed as they were in the
specifications of older models for the binding of pages of mixed orientation
jobs. The old models are below:
-PCL-: Pre-04A models
bit 7
Letterhead mode printing
Disable
Enable
(Duplex)
Routes all pages through the duplex unit. If this is disabled, simplex pages
or the last page of an odd-paged duplex job, are not routed through the
duplex unit. This could result in problems with letterhead / pre-printed
pages.
Rev. 4/28/2011
To Next Page
Loading...
