System Service Mode
SM Appendix 3-125 D115/D116
Appendix:
SP Mode
Tables
1001 Bit Switch
006 Bit Switch 6 0 1
bit 7 Timing of the PJL Status ReadBack (JOB END) when
printing multiple collated copies.
0:
Disabled
1:
Enable
This bitsw determines the timing of the PJL USTATUS JOB END sent when
multiple collated copies are being printed.
0 (default): JOB END is sent by the device to the client after the first copy has
completed printing. This causes the page counter to be incremented after the first
copy and then again at the end of the job.
1: JOB END is sent by the device to the client after the last copy has finished
printing. This causes the page counter to be incremented at the end of each job.
1001 Bit Switch
007
Bit Switch 7 DFU
- -
1001 Bit Switch
008
Bit Switch 8 bit 0~8 DFU
- -
1003 Clear Setting Not used
1004 Print Summary Prints the service summary sheet
(An error log is printed in addition to the
configuration page).
1005 Display Version Displays the version of the controller firmware.
1006 Sample/Locked print 0: Link with Doc., 1: On
Enables and disables the document server. When
you select "0" the document server is enabled or
disables in accordance with copy service mode
SP5-967. When you select "1" the document
server is enabled regardless of service mode
SP5-967.
Rev. 4/28/2011
⇒
To Next Page
Loading...
