Bit Switches
SM Appendix 5-19 D115/D116
Appendix:
Fax Service
Program
4-6
Image Quality in Special
Original mode
This setting determines the desirable scanning
image quality when the special original mode is
selected with the operation panel.
Bit 6 Bit 5 Bit 4 Mode
0 0 0 Text
0 0 1 Text/ Sharp
0 1 0 Photo/ Diffusion
0 1 1 Photo/ Dithering
1 0 0 Dropout color
1 0 1 -
7
Not used
Do not change these settings.
System Switch 1C - Not used (do not change these settings)
System Switch 1D [SP No. 1-101-030]
No FUNCTION COMMENTS
0
RTI/CSI/CPS code display
0: Enable
1: Disable
0: RTI, CSI, CPS codes are displayed on the top
line of the LCD panel during communication.
1: Codes are switched off (no display)
1
Not used
Do not change this setting.
2
Destination telephone
number display limitation
0: OFF, 1: ON
When "1" is selected, the destination telephone
number display is limited and redial is disabled.
3
Operation selection without
PIN code registered
0: Transmission interrupted
1: No interrupted
transmission
0: When "0" is selected without PIN code
registration, transmission is interrupted and an alert
message shows on the LCD.
To Next Page
Loading...
