Bit Switches
D115/D116 5-18 SM Appendix
System Switch 17 - Not used (do not change these settings)
System Switch 18 - Not used (do not change these settings)
System Switch 19 [SP No. 1-101-026]
No FUNCTION COMMENTS
0-6
Not used
Do not change the settings.
7
Special Original mode
0: Disabled
1: Enabled
1: If the customer frequently wishes to transmit a
form or letterhead which has a colored or printed
background, change this bit to “1”. “Original 1” and
“Original 2” can be selected in addition to the “Text”,
“Text/Photo” and “Photo” modes.
System Switch 1A - Not used (do not change these settings)
System Switch 1B [SP No. 1-101-028]
In this switch setting, there is a limitation. Do not select the same image quality in two
modes.
e.g) these setting combination is not allowed:
[Bit1: 0, Bit 0: 1 = Text] [Bit3: 0, Bit 2:0 = Photo/ Diffusion]
[Bit 6: 0, Bit 5: 0, Bit 4: 0 = Text]
No. FUNCTION COMMENTS
0-1
Image Quality in Text mode
Bit 1: 0, Bit 0: 0 = Text/ Sharp
Bit 1: 0, Bit 0: 1 = Text
This setting determines the desirable scanning
image quality when the text mode is selected
with the operation panel.
2-3
Image Quality in Photo mode
Bit 3: 0, Bit 2: 0 = Photo/
Diffusion
Bit 3: 0, Bit 2: 1 = Photo/
Dithering
This setting determines the desirable scanning
image quality when the photo mode is selected
with the operation panel.
To Next Page
Loading...
