Bit Switches
SM Appendix 5-17 D115/D116
Appendix:
Fax Service
Program
System Switch 15 [SP No. 1-101-022]
No FUNCTION COMMENTS
0
Not used
Do not change the settings.
1
Going into the Energy Saver
mode automatically
0: Enabled
1: Disabled
1: The machine will restart from the Energy Saver
mode quickly, because the +5V power supply is
active even in the Energy Saver mode.
2-3
Not used
Do not change these settings.
4-5
Interval for preventing the
machine from entering Energy
Saver mode if there is a
pending transmission file.
Bit 5: 0, Bit 4: 0
1 min
Bit 5: 0, Bit 4: 1
30 min1
Bit 5: 1, Bit 4: 0
1 hour
Bit 5: 1, Bit 4: 1
24 hours
If there is a file waiting for transmission, the
machine does not go to Energy Saver mode
during the selected period.
After transmitting the file, if there is no file waiting
for transmission, the machine goes to the Energy
Saver mode.
6-7
Not used
Do not change
System Switch 16 [SP No. 1-101-023]
No FUNCTION COMMENTS
0 Parallel Broadcasting
0: Disabled
1: Enabled
1: The machine sends messages simultaneously
using all available ports during broadcasting.
1-7 Not used Do not change these settings.
To Next Page
Loading...
