1000-SHEET FINISHER INSTALLATION
SM 3-43 B089/B093
Installation
2. Install the front joint bracket [A] ( x 2 M4 x 17) and rear joint bracket [B]
( x 1 M4 x 17).
3. Remove the left stand [C] ( x 3)
4. Install the lower grounding plate [D] on the finisher ( x 2 M3 x 8).
NOTE: Use the screw removed in step 1 and the screw from the accessory
box.
5. Open the front door [E]. Then pull the locking lever [F].
6. Align the finisher on the joint brackets, and lock it in place by pushing the
locking lever.
7. Secure the locking lever ( x 1 knob M3 x 8) and close the front door.
8. Install the copy tray [G] ( x 1 knob M4 x 10).
9. Connect the finisher cable [H] to the main machine.
B408I104.WMF
B408I105.WMF
[A]
[B]
[C]
[E]
[F]
[G]
[H]
[D]
To Next Page
Loading...
