JUNCTION GATE MECHANISM
B300/B416 11-4 SM
2. DETAILED DESCRIPTION
2.1 JUNCTION GATE MECHANISM
Depending on the selected mode, the copies are directed up, left, or right by the
exit junction gate [A] and the duplex junction gate [B]. These are controlled by the
exit junction gate solenoid [C] and the duplex junction gate solenoid [D].
To the Exit Tray or Bridge Unit (for the Upper Tray on top of the Bridge
Unit, or the Finisher)
The exit junction gate solenoid stays off and the paper is directed to the copier exit
unit [E].
To the 1-bin Tray
The exit junction gate solenoid turns on and the duplex junction gate solenoid stays
off. The paper is directed to the 1-bin tray [F].
To the Duplex Unit
The exit junction gate solenoid and the duplex junction gate solenoid both turn on
and the paper is directed to the duplex unit [G].
B416D504.WMF
B416D505.WMF
B416D506.WMF
[A]
[B]
[C]
[D]
[A]
[E]
[A]
[B]
[F]
[G]
To Next Page
Loading...
