Ricoh B089 - System Setting Reset; System Settings and Copy Setting Reset

SYSTEM SETTINGS AND COPY SETTING RESET
SM 4-119 B089/B093
Service
Tables
4.5 SYSTEM SETTINGS AND COPY SETTING RESET
4.5.1 SYSTEM SETTING RESET
The system settings in the UP mode can be reset to their defaults. Use the
following procedure.
1. Press User Tools/Counter.
2. Hold down  and then press System Settings.
NOTE: You must press  first.
3. When the message prompts you to confirm that you want to reset the system
settings, press Yes.
4. When the message tells you that the settings have been reset, press Exit.
B089S912.WMF