Ricoh B089 - Optional Boards and Dimms; Removing the Covers

OPTIONAL BOARDS AND DIMMS
B089/B093 3-60 SM
3.20 OPTIONAL BOARDS AND DIMMS
3.20.1 REMOVING THE COVERS
CAUTION
Unplug the main machine power cord before starting the following
procedure.
1. If the paper tray unit or LCT is installed, remove the connector cover [A] ( x 1)
and disconnect the cable to prevent the cover from damage.
2. Remove the rear cover [B] ( x 4).
3. Remove the controller board cover [C] ( x 8).
4. Remove the knockouts [D] as required.
Top: NIB, marked “LAN”
Middle: File Format Converter, IEEE 1394, IEEE 802.11b, USB 2.0, or
Bluetooth. (Only one of these can be installed.)
Bottom: IEEE 1284. (The connector is provided on the controller board.)
B453I106.WMF
B453I101.WMF
[B]
[A]
[C]
[D]