SPECIFICATIONS
SM 5-1 IFAX
Internet Fax
(IFAX)
SPECIFICATIONS
1. IFAX SPECIFICATIONS
Type
Fax Unit and Printer/Scanner Unit
Connectivity
Local area network
Ethernet 100base-Tx/10base-T
Connection
100base-Tx/10base-T direct
connection
Resolution
Main scan: 200 dpi
Sub scan: 400 dpi, 200 dpi, 100 dpi
NOTE: To use 400 dpi, IFAX SW01 Bit
4 must be set to “1”.
Transmission Time
1 s (through a LAN to the server)
Condition: ITU-T #1 test document
(Selerexe Letter)
MTF correction: OFF
TTI: None
Resolution: 200 x 100 dpi
Communication speed: 10 Mbps
Correspondent device: E-mail server
Line conditions: No terminal access
Document Size
Maximum message width is A4/LT.
Note: To use B4 and A3 width, IFAX
SW00 Bit 1 (B4) and/or Bit 2 (A3)
must be set to “1”.
E-mail File Format
Single/multi-part
MIME conversion
Image: TIFF-F (MH) format only
Protocol
(Supported by TCP/IP protocol)
Transmission:
IETF RFC821 SMTP procedure
Reception:
IETF RFC1725 POP3 procedure
IETF RFC2026 IMAP4 procedure
Data rate
100 Mbps(100base-Tx)
10 Mbps (10base-T)
Remark
The machine must be set up as an e-
mail client before installation. Any
client PCs connected to the machine
through a LAN must also be e-mail
clients, or some features will not work
(e.g. Autorouting).
To Next Page
Loading...
