Ricoh B089 - DIMM or Sd Card

DIMM OR SD CARD
SM 9 B692/B694
B692/B694
Data
Overwrite
Security Unit
3.3 DIMM OR SD CARD
1. Switch the operation switch off.
2. Switch the main switch off.
3. Disconnect the power cord from the power supply.
4. Disconnect the network cable if the NIB option is installed.
5. Disconnect the fax cable if the fax option is installed.
6. Make sure that you have the correct DOS unit for the machine.
7. The machine model requires the DIMM or the SD Card.
Model Security Module Required
B135/B138 DOS Unit Type A (DIMM)
B089/B093 DOS Unit Type A (DIMM)
B147/B149 DOS Unit Type B (SD card)
8. Install either the DIMM or the SD Card in the controller slot:
• B135/B138, B089/B093 require the DIMM.
• B147/B149 requires the SD card.
9. Connect the network cable if the NIB option is installed.
10. Connect the Fax cable if the fax option is installed.
11. Switch the main power switch on.
12. Make a Sample Copy.
13. Check the overwrite erase icon [A] in front of the date in the upper right corner
of the operation panel display.
14. Confirm that the icon has changed from the display for data on disk [B] to no
data on disk [C].
B692R907.WMF
CopiesTotalOrigi
.
010
09/09/2003 14:13
B692R908.WMF
[A]
[B]
[C]