G3 INTERFACE UNIT TYPE 2027 INSTALLATION
SM 1-5 B576
Fax Option
B576
1.3 G3 INTERFACE UNIT TYPE 2027 INSTALLATION
NOTE: This installation procedure uses the following symbols.
: Screws : Connectors
CAUTION
Before installing this option, do the following:
3. If there is a printer option in the machine, print out all data in the printer
buffer.
4. Turn off the main switch and disconnect the power cord and the
network.
1. Remove the small cover [A] (1 rivet) and the rear cover [B] ( x 4). Then cut
away the jack window [C].
2. Remove the NCU unit [D] ( x 4, x 2)
3. Remove the NCU [E] from the NCU unit ( x 4). Connect harness [F] to the
FCU.
B593I502.WMF
B576I101.WMF
B593I503.WMF
[D]
[E]
[F]
[A]
[B]
To Next Page
Loading...
