Ricoh B089 - Test Pattern Printing (Sp)

SERVICE PROGRAM MODE
SM 4-99 B089/B093
Service
Tables
4.2.3 TEST PATTERN PRINTING (SP2902-3)
NOTE: Always print a test pattern to confirm correct operation of the machine.
1. Enter the SP mode and select SP2902.
2. Press .
3. Enter the number for the test pattern that you want to print and press . (See
the tables below.)
4. Press Copy Window to open the copy window and then select the settings for
the test print (paper size, etc.)
5. Press Start  twice. (Ignore the “Place Original” messages) to start the test
print.
6. Press SP Mode (highlighted) to return to the SP mode display.
No. Test Pattern No. Test Pattern
0 None 15 Grayscale (Grid)
1 Vertical Line (1dot) 16 Grayscale with White Line (Horizontal)
2 Horizontal Line (1dot) 17 Grayscale with White Line (Vertical)
3 Vertical Line (2dot) 18
Grayscale with White Line (Vertical
/Horizontal)
4 Horizontal Line (2 dot) 23 P Pattern
5 Grid Pattern (1dot) 31 Grayscale (Horizontal, 8bit, Odd)
6 Grid Pattern (1dot pair) 32 Grayscale (Vertical, 8bit, Odd)
7 Alternating Dot Pattern 33
Grayscale with White Line (Horizontal 8bit,
Odd)
8 Full Dot Pattern 34
Grayscale with White Line (Vertical 8bit,
Odd)
9 Black band 35 Grayscale (Horizontal, 8bit, Even)
10 Trimming Area 36 Grayscale (Vertical, 8bit, Even)
11 Argyle Pattern 37
Grayscale with White Line (Horizontal 8bit,
Even)
12 Grayscale (Horizontal) 38
Grayscale with White Line (Vertical 8bit,
Even)
13 Grayscale (Vertical) 40 Grid (1dot pair) (OR Outside Data 1)
14 Grayscale (Vertical/Horizontal) 41 Trimming Area (OR Outside Data)
Also see SP 4417 in the SP table for a different set of test patterns.