Ricoh B089 - Power Pack; Sbcu Board

PCBS AND OTHER ITEMS
B089/B093 6-34 SM
6.7.2 SBCU BOARD
1. Remove the rear cover. (! 6.6.3)
2. Remove the SBCU board [A] (All connectors, 6 screws).
NOTE: Make sure that the DIPswitch settings on the new board are the same as
those on the old board.
6.7.3 POWER PACK
1. Remove the rear cover. (! 6.6.3)
2. Swing down the I/O board bracket. (! 6.6.5)
3. Remove the power pack [A] (5 connectors, 3 screws).
B027R708.WMF
B027R710.WMF
[A]
[A]